Y3150E Processing Cylindrical Gear Machine Gear Hobbing Machine
Gear hobbing machine basic machine introduction:
Y3150 series gear hobbing machine is fixed by vertical column and adopts the traditional layout of horizontally moving working table, suitable for processing cylindrical gears, worm wheel and short spline shaft in bulk, in package, or in single workpiece.
Raised height for vertical column and increased stroke: The vertical column is made higher (180/130mm increased axial stroke in head slide than Y3180/Y3150 of the same kind) to enable processing of larger tooth width.
Service life of cutting tools is increased by electric tool leap. The longest stroke reaching 180mm, such electric tool leap takes longer hob and greatly increases life the hob.
1. The model Y3150E gear hobbing machine is applicable to cut spur and helical gears,worm wheels,sprockets and short spindle shafts in jobbing, small or batch production.
2. It is characterized by good rigidity,high working accuracy, easy operation and simple set up procedure, either conventional or climb method can be used in the machine.
3. In addition, the machine is equipped with an automatic shout-down device and safety-securing mechanisms,and an automatic lubricating system.
4. Imported hydraulic components can be used for the machine according to the customers requirements. Furthermore,tangential hob head is also available for special order to cut worm wheels under tangential feeding mode.
Specification of gear hobbing machine:
| Model | Y3150E | Y3180H |
| Max workpiece diameter(with rear column/without rear column) | 350mm/500mm | 550mm/800mm |
| Max hobbing modulus | 8mm | 10mm |
| Max Processing Width | 250mm | 300mm |
| Min processing gear | Z/K=6 | Z/K=8 |
| Max vertical travel of tool post | 300mm | 350mm |
| Max swiver angel of tool post | ±240° | ±240° |
| Distance between cutter axis and worktable | 235-535mm | 235-585mm |
| Spindle taper | Morse 5 | Morse 5 |
| Hob diameter | 160mm | 180mm |
| Max axial movement of cutter | -------- | 50mm |
| Hob abor diameters | Φ22,Φ27,Φ32MM | Φ22,Φ27,Φ32,Φ40MM |
| Distance between hob axis center and worktable | 30-330mm | 50-550mm |
| Worktable aperture | 80mm | 80mm |
| Taper bore of workpiece mandrel | Morse 5 | Morse 5 |
| Worktable diameter | 520mm | 650mm |
| Spindle rotate speed and range | 9Level 40-250R/Min | 8Level 40-200R/Min |
| Rapid travel speed of tool post slide | ≤540MM/Min | ≤540MM/Min |
| Worktable rapid moving speed | ≤500MM/Min | ≤500MM/Min |
| Distance between worktable | 400-600mm | 400-600mm |
| Axial feed rate and degree | 12Level 0.4-4MM/R | 12Level 0.4-4MM/R |
| main motor power and synchro-speed | N=4Kw 1500R/Min | N=5.5Kw 1500R/Min |
| Machine weight | 4500kg | 5500kg |
| Overall dimension | 2440*1370*1800MM | 2752*1490*1870MM |
Packing type of gear hobbing machine:
Our warranty and services about gear hobbing machine:
Time limitation for warranty period and response for a period of 12 months from the date of B/L, any defective or problem that is not caused by mis-operation will be repaired or replaced free of charge by the supplier.
1. Any inquiries will be replied within 12 hours
2. Professional manufacturer, Welcome to visit our factory at any time
3. OEM services are welcomed, and we can help you to print your logo, company information etc on our products and package .
4. High quality, fashion designs, reasonable & competitive price and fast lead time
5. After-sale service
6. Faster delivery
7. Protection of your sales area, ideas of design and all your private information
You can pay for the order via: T/T, western union, L/C at sight.
Our ultimate goal is your satisfaction!
